It is not easy to remove wax after it has fallen on the carpet if you have accidentally spilled a candle. But worry not—with just some ordinary household items and following these simple steps, you will be able to get wax out of the carpet without any problem. This article by the top-rated carpets supplier in UAE will explain why wax sticks to carpets and also describe a process of how to get wax out of carpet? Using numerous household products.
Why Wax Stains Carpets?
The wax consists of paraffin, stearic acid, and other components that make it challenging to remove from any type of carpet including sisal,round & persian carpet when it is stuck on the fibers. Even scraping the hardened wax can leave ugly marks.
Certain common home and cleaning supplies can dissolve wax from the carpet pile to make it easier to remove it. Hard wax stains can be removed with effort; below are the steps. The most effective method is to address the wax stain while it’s still fresh and hasn’t penetrated deeply into the fabric.
What You’ll Need
Gather your cleaning gear before you handle the wax stain situation:
- White rags
- Paper towels
- Plastic scraper
- Butter knife
- Vacuum cleaner
- Hot water
- Dish soap
- Rubbing alcohol
- Dry cleaning solvent, acetone, or mineral spirits (for strongly set-in stains)
Easy Steps of How to Get Wax Out of Carpet
Here’s a guide on how to restore your wax-stained carpet to its original condition. You can effectively remove the wax and its stains by carefully scraping it and treating the carpets like sisal, stone & red carpets according to its type.
Step 1: Act Fast!
If you see wax on any carpet like exhibition or sisal carpets, do not wait a second; begin removing it instantly. You should use a hard plastic scraper or a butter knife to remove the wax from the surface. Gently work a section at a time, pulling the wax without compromising the carpet fibers. If the wax is already solid, you may need to melt it first before using the scraper to remove it (as explained below).
Step 2: Apply Heat (Optional)
If the wax is deeply embedded in the carpet fibers, then you will need to melt the wax first. Turning on a hairdryer to its minimum heat over and around the wax-stained region is the next step.
When the wax has melted, manipulate it with your plastic scraper to clear as much as possible while it remains warm and malleable. Ensure that the temperature does not rise too high in one area to prevent burning the fibers on the carpet.
Step 3: Blot the Stain
After carefully wiping up the surface with a cloth, you should begin to blot the unchanged softened or liquid wax remaining on the carpet. To remove as much wax as possible, softly dab the area with white rags or paper towels.
Ensure that the pressure is applied gently to avoid spreading the stain deeper into the carpet backing. Keep blotting until no more wax is moved to the rags.
Step 4: Use Cleaner
Once the surface has entirely dried, you should wipe it with a cleaning solution. Different types of carpets like carpet tiles and artificial grass carpet need different kinds of cleaning solutions.
- Prepare a soft detergent solution by mixing one cup of warm water and one-quarter teaspoon of clear dish soap for synthetic carpets. Warm water is best for delicate rugs or fabrics.
- For colored wool carpets, cool water and vinegar should be used. Also, use a carpet shampoo with a pH level of around 7.
- It is always best to ask the manufacturer what detergents to use for luxury carpets, such as silk.
In deep stains, the cleaning solution should be gently applied to the stained area using a soft bristle brush. Avoid rubbing it hard, as this could make the carpet’s surface rough. The cleaning solution should stay on the carpet for 5 minutes to dissolve the remaining wax particles.
Step 5: Blot & Rinse
Use clean cloths and paper towels to remove cleaning solutions as you can. Spray or lightly wipe the area with clean water. Again, blot and try to remove all the moisture as possible. Waiting too long could cause mold or mildew to spread. If possible, aim your fan at the wet spot to help it dry faster. If possible, aim your fan at the damp spot to help it dry faster. Alternatively, you can use a thick cloth on the area to absorb the moisture.
Step 6 – Remove Final Traces
If some of the wax stain is still visible, repeat steps 3 to 5, but only on the stained area. To remove some extremely old stains, proceed cautiously with an oil-based cleaner like dry cleaning solvent, paint thinner, acetone, etc. Always test it on a small area first to be safe. Dab this gently on the stain, and then use carpet cleaner as directed above.
Step 7: Vacuum
After the stain has been removed, it is good to use your vacuum to go over the area to clean the remaining cleaning solution. Your carpet should now be as clean as the day it was installed or purchased!
If the correct techniques and cleaning materials are utilized, wax that has penetrated deep into the carpet pile can be effectively cleaned. A bit more cleaning or an early intervention could prevent the need to replace the carpet entirely.
Final Words
So, that was all about how to get wax out of carpet. While wax stains may be tough to deal with, with quick action and proper methods of removing the stains, you can restore your carpet and remove all the traces of the wax spillage. With time and effort, you can do a professional-quality stain removal job at home.
